CollectingSnapOn.com

Picked this up last summer. Anyone got a solution for the missing drawer? Its setup to either have another the same size as the one above it or to remove that one and have a second larger one like the one below the empty spot.

Looks like the only parts available from Snap On are the runners and small hardware. The only thing I can think of is fabrication or wait until a donor rolls by. Snap On used to provide dimensions in their parts catalogues for their storage units but they stopped doing this about ten years ago. If you had the dimensions, you could match up a drawer from another series unit that had the same dimensions. I'll look around. Would be nice to see it complete.

Here is a KRA400 which matches you unit (10 drawers). Here is the link: http://buy1.snapon.com/catalog/parts/pr ... _id=678103

I think this is what you have. Good luck.

WELL, IT LOOKS LIKE THE 400 SERIES is all ball bearing. Even the later 300 series up to kra77 have ball bearing slides. Snappy probably no longer stock runner type drawers. I'll look around my area. Part of the fun is the hunt.

Thanks for the research. I've been trying to keep a watchful eye on our local craigslist and have a search saved on ebay but nothing has come up so far. I do have the slides too they are still in there.