Page 1 of 1
RATCHET COVER PLATES
Posted: Sun May 06, 2012 9:13 am
by SNAPdragON
AM INTERESTED IN ROUGH CHRONOLOGY AND TYPES OF RATCHET COVERS USED.....ESP NOW THAT THE SEALED HEADS HAVE COME INTO BEING!
Re: RATCHET COVER PLATES
Posted: Sun May 06, 2012 9:59 am
by snapmom
Brads (there are later scaffold rats with brads)
Fitted, no screws
Screws from the top
Screws from the bottom S80 (there was a early version of this)
Back to screws from the top. S80A
Re: RATCHET COVER PLATES
Posted: Sun May 06, 2012 7:21 pm
by SNAPdragON
my question primarily was aimed at the top covers.....sort of looks like a freeze plug! prob did not make that clear---sorry! ref. red ones, ones w/red letters, plain ones, black ones w/letters......love those red ones! regards, SNAPdragON.
Re: RATCHET COVER PLATES
Posted: Mon May 07, 2012 8:50 am
by snapmom
Dust Covers:
Here are some. There are prob. more. I have seen one of the early F711 rats with the model number on the dust cover.
Re: RATCHET COVER PLATES
Posted: Mon May 07, 2012 9:26 am
by snapy64
the red covers were included with the 30 tooth ratchets and the black covers were for the 20 tooth ratchets so you could easily see the difference - the aluminum covers were earlier and the all plastic were later
Re: RATCHET COVER PLATES
Posted: Tue May 08, 2012 10:00 pm
by J.A.F.E.
There is a red all plastic cap like the black one at right side of the top row.
I believe the new repair kits come with a silver cap.