1/2 No 2 Short Tee

First - is an early No 2 Short Tee (Pre 1923)

Second shows a 1923 logo above and a 1925-29 logo below

This is a unique tool, the “nut spinners, below are much more useful, but this represents an early tool with a fixed head

Number	Description	Date Range
F-1	Off Set Handle 8 inch length	1927 – 1929

1/2 Pre 1923 Long Tee

<-Back Next->

Pre 1923 Long Tee

Here is a tool with a very early logo that is not in any Catalog. it seems to be the first long T

1/2 Early Long Tee Handles

<-Back Next->

No 3 Long Tee Handles. The top Tee is early, the bottom is later, in the close ups, the ball detent stops are early and the pinched shaft is late

Early Long Tee Handles. The top Tee is early, the bottom is later, in the close ups, the ball detent stops are early and the pinched shaft is late

Number	Description	Date Range
No. 3	Early Long Speed T Handle	Pre 1923-1941 Sporadically
No 3A	T bar twisted bar with traditional handle – 24 inches long	1925 – 1928
No 33	T bar with extended shaft	1936-1937

1/2 S-5 Sliding T bar Progression

<-Back Next->

1st is a very early (1923 or before)

2nd has an early Snap-on logo

3rd clearly date stamped 1934

4th 1937 – 1948 knurled head style

These 4 S-5 Sliding T bars show a progression from a very early (1923 or before) showing no center grove, a small underlined Snap-on logo and a smaller head.

The first S-5 has a smaller diameter bar.

The next has the same small logo as the first and is dimensionally the same as the 3rd.

The 3rd is clearly date stamped 1934 and has a different logo style.

The last S-5 has the 1937 – 1948 knurled head style.

The first head is shorter – the next 3 are dimensionally the same.

The bottom photos show the back of the heads.

These start with an indentation (alignment dimple?) before 1934 and a through hole (oil port?) After 1934 to 1948

Early Sliding T bar listings

Number	Description	Length	Date Range
S-5	Sliding T Handle	5	1925 – 1933
S-10	Sliding T Handle	10	1927-1948
S-15	Sliding T Handle	15	1929-1948

<-Back Next->