1/4 Inch Drive Carburetion Tools

Catalog drawing from 1958 and actual

Carburetion Tools

TM-65 - This is a wrench to adjust carburators in tight areas (like around or under air cleaners). TM-65 - This is a wrench to adjust carburetors in tight areas (like around or under air cleaners). There are 2 variations. The earlier one has a flexible tip and ran through the 1980s. In 1973 a non-flexible, solid tip.

It is obvious that the 9/32 and ¼ inch drive was targeted for carburetor repair. There is a group of specialized tools that were designed for specific models. These were

¼inch Square Drive Sockets	Description	Date Range
TM-65	Flexible Adjustable Wrench	1958-1999
TMC-9	9/32 double hex deep	1946-1953
TMC-10	5/16 double hex deep	1946-1955
TMC-13	13/32 double hex deep	1946-1953
TMC-15	15/32 (Stromberg check valve)	1945-1955
TMC-16	½ deep socket	1948-1955
TMC-34	2 prong for jet	1950
TMC-36	Chandler-Grove Carburetor 2 prong for jet	1945 – 1953
TMC-36A	Chandler-Grove Carburetor 2 prong for jet	1955
TMC-37	Stromberg Piston Valve socket – Type D	1945-1955
TMC-38	Stromberg Discharge Jet socket	1945-1955
TMC-42	Stromberg small oval jet for 1933 – 34 Fords	1945-1955
TMC-43	Prong 0.52 X 1/16	1946-1953
TMC-44	Prong 1/16 X 0.52	1946-1953
TMC-45	Prong 5/64 X 0.087	1946-1953
TMC-46	Oval for Stromberg jet (non-Ford)	1945-1955
TMC-104	Midget screw driver	1950 - 1953
TMC-105	Midget screw driver	1950 – 1953
TMC-106	Midget screw driver	1950 – 1953
TMC-104A	Midget screw driver	1955 – 1962
TMC-105A	Midget screw driver	1955 –1962
TMC-106A	Midget screw driver	1955 –1962

<-Back Next->

Actual Exanples

From Left to Right 1st TMC-38 dated 1947, GSTMD8 - 1997 (not carb), TMC-45 undated, an unlabled 11/32 WWII tool, TMC9 1947, and TMC-16 undates

In 1950 the MC series (MC = Midget Carburetor?) started to eclipse the TCM series.

Holley Tools	Description	Date Range
MC-39	Small ring inserter socket	1950
MC-40	Large ring inserter socket	1950
S-8655B	Ford Holley economizer	1953 – 1955
FMC-38	Valve plug inserter	1953 – 1955

MC-119	Pronged socket for economizer piston	1953 – 1955
MC-119A	Pronged socket for economizer piston	1955 – 1955
MC-125	Fuel inlet valve seat remover	1953-1955
MC-127	Large power valve remover	1953-1955
MC-128	Small power valve remover	1953-1955

<-Back Next->